User Manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 1. Begin by removing the two front
crossmembers and the two rear chassis stiffeners by the
muffler inlets. This will allow access to the exhaust
system.
Step 2. To remove the OEM exhaust loosen the two
bolt clamps located behind the catalytic converters.
Working rearward disengage the rubber inulators from the
welded hangers, retain clamps and rubber insultors as
they will be used to install the new system. Remove
complete system.