Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 6. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front to
rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.
19312 5/25/16 REV 000
Step 5. Loosely attach both driver and passenger side
Muffler Assembly flanges to the Y-Pipe Assembly. Secure
with the supplied gaskets and hardware. Engage welded
hangers to rubber isolators.