Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 1. Begin removing the OEM exhaust system by
loosening the clamps located in front of the resonator. Next
working front to rear extract the hangers from the rubber
insulators and remove the OEM system. Retain insulators and
clamps as they will be used to install the new system.
Step 2. Begin installation of the new system by loosely
attaching the X-Pipe Assembly to the outlets using the OEM
clamps. Leave all clamps loose until final adjustment.
Step 3. Next attach the Mid Pipe Assemblies to the X-Pipe
using the supplied 3.00" clamps and fitting the hangers into
the rubber insulators.
Step 4. Finish the initial installation by fitting the Muffler
Assemblies onto the Mid pipe Assemblies using the supplied
3.00" clamps and inserting the hangers into the rubber
insulators.
19302 5/5/16 REV 000