Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 6. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front
to rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.
Step 5. Once the tips are removed install the OEM
Tailpipe extensions using 2.50" Supplied clamps and fit
into rubber insulators. Finish by installing the Stock tips to
these extension pipes using the supplied ball clamp.
19209 12/4/14 REV 000