Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 5. For the passengers side Tail Pipe Assembly
there is an existing hole in the vehicles sub frame. The
hole location will be apparent once the Tail Pipe Assembly
is in position. Locate the supplied threaded hanger and
hardware. Use the suppled rubber insulator to attach the
welded hanger on the pipe as shown.
Step 6. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front
to rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.