Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 1. To remove the OEM exhaust system, unbolt the
flange attaching the systems inlet pipes to the catalytic
converter outlet pipes. Disengage all welded hangers
from the OEM rubber insulators. Do not discard the OEM
fasteners or damage the rubber insulators as they will be
needed to mount your new MAGNAFLOW system.
Step 3. Install the new system by attaching the Muffler
Assembly to the OEM catalytic converter outlet pipe using
the OEM bolts and supplied hardware. Leave all clamps
and fasteners loose for final adjustment of the complete
system once installed.
Step 4. Install the Mid Pipe to the Muffler Assembly
using the supplied 2.25" clamp. Next install the Y-Pipe
and Tail Pipe Assemblies in a similar fashion locating the
welded hangers to the rubber insulators.
Step 2. You will need to cut the two pipes at the rear
OEM muffler to remove the system.