Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 1. To extract the OEM exhaust system you
will first need to remove the brace located in front of
the factory resonator. Next un-fasten the flanges
located behind the catalytic converters and
resonator and disengage all welded hangers from
the rubber insulators. Do not damage or discard the
rubber insulators or fasteners as they will be
re-used to mount the new system. You can now
remove the exhaust from the vehicle.
Step 2. Begin installation of the new system by
fastening the Resonator Assembly inlets to the
catalytic converter using the OEM fasteners and
supplied gaskets (Leave all clamps and fasteners
loose for final adjustment of the complete system.)
Step 3. Next Install the Mid-Pipe Assemblies to
the outlets of the Resonator Assembly and then the
Muffler Assemblies to the Mid-Pipes using the
supplied 2.50" clamps. Insert hangers into rubber
insulators. Re-attach brace.