M11RF-LCD-UM 9/10/04 9:48 AM Page 1 User’s Manual 4 5 C 4/5/6 Two-Way Communication LCD Transmitter Model: M11RF-LCD For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.
M11RF-LCD-UM 9/10/04 9:48 AM Page 2 Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product with years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system.
M11RF-LCD-UM 9/10/04 9:48 AM Page 3 Remote Control Transmitters Operation Transmitter Button System Function Remark Lock Doors & Arm System Panic Function Press and Hold for 3 Seconds Car Locator Under Armed Mode - Arm and Delete the 2 Stage Shock Sensor Press Twice within 3 Seconds + Silent Arming/Disarming Ignition in “OFF” Position + Active Anti-Car Jacking Mode Ignition in “ON” Position, Press and Hold for 2 Seconds + Channel #4 Timer Output (4) + Channel #5 Timer Output (5) + C
M11RF-LCD-UM 9/10/04 9:48 AM Page 4 LCD Display Transmitter Operations Transmitter Button System Function Remark Systems Trigger Record Check Press within 3 Seconds System’s Status Check Press within 3 Seconds Button Lock Press within 3 Seconds and Hold “Lock” Button for 2 seconds Optional Driving Pager Press within 3 Seconds Monitor Interior Temperature Press within 3 Seconds Daily Timer Start Press within 3 Seconds SET LCD Screen Lamp Turns ON for 5 Seconds Press and Hold for 1 Second
M11RF-LCD-UM 9/10/04 9:48 AM Page 5 LED Display LED OFF Slow Flashing Flash Fast Flashing On Solid 2 Flashes - Pause 3 Flashes - Pause 4 Flashes - Pause 5 Flashes - Pause Function System is Disarmed System is Armed System in Passive Starter Disable System in Passive Arming System in Valet Mode Zone 1, Warn Away Trigger Zone 2, Trigger on Trunk/Hook Zone 3, Trigger on Door Switch Zone 4, Trigger on Shock Sensor Zone 5, Trigger on Ignition Switch Parking Light Flash 1 Flash 2 Flashes 3 Flashes 12 Flashe
M11RF-LCD-UM 9/10/04 9:48 AM Page 6 Active Arming: Lock & Arm 1. Press the button on the transmitter. 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. System Armed Door Ajar Trunk/Hood Ajar Clear the Flash Icon: Press the SET button 3 times within 3 seconds to clear the flash icon on the LCD screen transmitter.
M11RF-LCD-UM 9/10/04 9:48 AM Page 7 Active Disarming Unlock & Disarm 1. Press the button on the transmitter. 2. The siren will chirp twice and parking lights will flash twice indicating that the system is now disarmed. The vehicle door will unlock and the dome light will turn on for 30 seconds upon disarming when interfaced with the security system.
M11RF-LCD-UM 9/10/04 9:48 AM Page 8 Valet Mode (System in Disarm or Valet Mode) The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions and remote start functions are bypassed, however the remote panic feature and remote door locks will remain operational.
M11RF-LCD-UM 9/10/04 9:48 AM Page 9 Trigger the System (Continued) Ignition Trigger (Clear the Flash Icon and Melody Sound): When the Security System is triggered, the LCD screen will alert the user through melody sound and flashing icons. By pressing the “SET” button 3 times within 3 seconds it will clear the flashing icons and stop the melody sound. Stop the Melody Sound: When the Security System is triggered, it will alert the user with flashing icons on the LCD Display and audible melody sound.
M11RF-LCD-UM 9/10/04 9:48 AM Page 10 Anti-Car Jacking (Continued) Trigger the Anti-Car Jacking Mode Three Timer circuits will function as follows: First Timer Circuit 1. 50 seconds after the car jacking mode has been activated, the siren will begin to sound for 15 seconds. 2. During the 15 second activation period, you will be alerted to push the valet switch once to turn off the car jacking feature. 3. If by now the valet switch has not been pushed, it will enter the second timer circuit.
M11RF-LCD-UM 9/10/04 9:48 AM Page 11 System Status Check (Continued) 1. First press the SET button on the transmitter, within 3 seconds press the buttons to activate outdoor driver paging function. The vehicle will then respond with chirps from the horn/siren and a melody sound from the LCD transmitter. The icon will then appear on the LCD transmitter screen. 2.
M11RF-LCD-UM 9/10/04 9:48 AM Page 12 Remote Start Operation To Remote Start Your Vehicle by Using the Remote Transmitter: 1. Press the button twice on the remote transmitter. 2. The parking lights will turn “ON” to indicate the remote start is activated. 3. The engine will start in approximately 5 seconds. 4.
M11RF-LCD-UM 9/10/04 9:48 AM Page 13 Remote Start Operation Timer Start: This unit can be programmed to start and run the engine every 3 hours, 2 hours or punctually at the same time every morning. The engine will run for the programmed running time and then shut down. Important! Timer start should be used only in open areas. Never start, or most importantly leave a vehicle running in an enclosed area.
M11RF-LCD-UM 9/10/04 9:48 AM Page 14 Turn Off Remote Start When the engine is running by remote start and you wish to stop the engine from remote start: 1. Press the button twice on the remote transmitter. 2. Move the optional remote start toggle switch to the “OFF” position (if installed). 3. Press the vehicle’s brake pedal, the engine will stop running and the parking lights turn off to indicate the engine has stopped.
M11RF-LCD-UM 9/10/04 9:48 AM Page 15 Remote LCD Icons Door Lock Lock your Vehicles Doors Door Unlock Unlock your Vehicles Doors Armed Mode Security System is Armed Valet Mode Security System is Armed Remote Transmission Transmitting a Signal In-Range Indicator You are within Remote Range Door Triggered Doors are Opened Trunk/Hood Triggered Trunk/Hood are Open Shock Sensor Shock Sensor Triggered Warn Away (Zone 1) Shock Sensor Triggered Ignition Engine Starting by Remote Engine Running Your Vehicles Engi
M11RF-LCD-UM 9/10/04 9:48 AM Page 16 Programming of the LCD Transmitter Button SET SET SET SET (3X) SET & LOCK SET & UNLOCK SET & SET & Description LCD Screen Lamp Turns ON for Five Seconds Timer Programming Mode Power Save Mode Clear the Flash Icon and Melody Sound on the LCD Screen Button Lock Enabled/Disabled Melody/Vibrate Mode Program Count Down Timer (10 m, 20 m, 30 m, 1 hr, 1.
M11RF-LCD-UM 9/10/04 9:48 AM Page 17 Programming the LCD Transmitter Vibration/Melody Mode: This mode is useful when you are in a noisy place and it is difficult to hear the beep from the remote. The LCD transmitter will vibrate if your security system has been activated. Press the “SET” button first, within 3 seconds press the ( ) button for 2 seconds to select the mode of vibrate/melody. The icon will be displayed on the LCD screen to show mode.
M11RF-LCD-UM 9/10/04 9:48 AM Page 18 Replacement Parts and Accessories TRANSMITTERS DESCRIPTION 5-Button Transmitter for M11a Security System. 4 $ PRICE M11RF-LCD 139.95 ea. M11RF 59.95 ea. 5 C 4/5/6 4-Button Transmitter with SAW Technology for M11a Security System. BATTERIES 1.5 Volt AAA Alkaline Battery commonly found in grocery stores, hardware stores, etc. CR2025 - 3 Volt Lithium Battery (2 pcs.
M11RF-LCD-UM 9/10/04 9:48 AM Page 19 Parts and Accessories Order Form Credit Card or Money Order Only (Sorry No Cash, C.O.D. or personal checks accepted) Call: (310) 884-7777 Fax: (310) 637-9542 Mail to: Magnadyne Corporation ATTN: Consumer Parts Sales P.O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY STATE ZIP CODE DAY TIME PHONE NUMBER CREDIT CARD INFORMATION CREDIT CARD N0.
M11RF-LCD-UM 9/10/04 9:48 AM Page 20 Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific produc
