Specifications

17
the device back on, and reverse your UP or DOWN one
press at a time, until the unit turns off. There is no way of
knowing which code is the one that will have the functions
that more closely match your device than the others, so it is
wise to try them all. See #9 below.
(Please press the UP or DOWN button within 20 seconds
of beginning programming, otherwise the remote will
revert to the SETUP menu, and then after a period of time,
it will go back to the MAIN device page.)
If there is more than one code number assigned to your
brand, try one code number at a time until you find the
right code number (the number that turns off your device.)
If the device turns off when you enter the three-digit code,
make note of the code. It will have at least some of the
functions in it that are needed to control your device.
8. Confirm that it is the right code by pressing the Power
button. After you have confirmed that the right code is
entered, save the code by pressing the SAVE button on the
LCD.
9. Confirm that you entered the right code number that
matches your component by pressing other functional
buttons. If any of the buttons do not operate, as they
should, please repeat from Step 1.
10. Continue to program other components by repeating
from step 1 above.
11. You can press EXIT at any time if you do not wish to
proceed.
12. Exit from Preprogrammed mode by pressing the MAIN
button and then exit from the SETUP mode by pressing the
MAIN button once again.
4. Programming the MX-500
TM
to Control Your Components