Specifications

1. Manually turn on the device you wish to operate.

2. Go to the SETUP mode by pressing both the MAIN and

AV buttons simultaneously for three seconds until SETUP

appears at the top of the LCD screen.

3. Press the P-PRO button next to the LCD screen.

4. The remote will be flashing “SELECT BUTTON”.

Press the button for the device you wish to program. (For

example, to program TV, press the TV button.)

5. The remote will be flashing “FROM TABLE”. Select the

device from which you want to access the code table.

Important: If you have already relabeled your device

keys, your LCD screen will not look like the illustration

above. Select the appropriate LCD button for the “FROM

TABLE” using the labels as shown in the illustration on

page 11 of this manual. For example, if you have relabeled

AUX as LIGHTS, you would still push the bottom-left

button to access the AUX Code Table.

Note: Use TV1, not TV2, to access the TV code library.

6. The remote will be flashing “ENTER NUMBER”. Refer

to the tables starting on page 57in the back of this manual

and find the manufacturer of your device. (If you are

programming the remote for the TV device, find the TV

device code table.)

7. Point the remote control toward the device and enter the

first three-digit code number you selected for your device.

4. Programming the MX-500

to Control Your Components