Installation Guide

Installation

• Read the instruction manual carefully before installing the unit

• Make sure to connect other wires before powering on the unit.

• To avoid short circuit, make sure all the exposed wires are insulated.

• Secure all wires after installation.

• Connect the player according to the wiring connection instruction on page 13 of this manual.

Wrong connection may cause damage to the unit.

• This player only fit for 12V DC device.

MOUNTING THE RV6100. Take off the units front trim ring.

2. Align the unit to dash cutout and mounting holes.

3 Secure unit into dash with 4 screws.

4. Put the decorative covers on.

4 Mounting Screws

Decorative Covers

Mounting Panel

Installation Cutout:

W 179mm (7") x H 51mm (2")