Operation and Installation Manual BT-HFKP30 Bluetooth Wireless Hands Free Kit with LCD Display
Safety and Caution • Never install the product in a location where it interferes with your field of vision. • This product must be installed and used in accordance with this manual. Any alterations to this product that enables it to be used in any way other than intended or designed could distract the driver and result in an accident causing injury or death.
Installation 00m V8 3.7 Ah Charging the Speakerphone: Insert the charger into a vehicle power outlet and the charging plug into Speakerphone’s charging socket. Charge the battery fully before using for the first time. Normal charging time is approximately 4 to 5 hours. Battery Cover n Li-io BLE GEA AR CH RE ERY. IFIED Y. OF BATTSPEC ONL SED E US GERDISPO AR CH T BE Y. IF MUSPERL ODE . O PR EXPL OR FIRE MAY AGED OF INM D DA OSE ORT DISPNOT SH DO UIT CIRC Installing the Battery: 1.
Installation (Continued) PLEASE READ PRIOR TO INSTALLATION CAUTION: The majority of vehicles manufactured today include air bag systems that inflate with great force during an accident. If necessary, contact the vehicle’s manufacturer for air bag information specific to the vehicle. DO NOT place an object, including all components, in the area over the air bag or in the air bag deployment area. If the components are improperly installed, serious injury could occur during inflation of the air bag.
Button and Feature Locations 1 2 4 3 7 8 5 9 1. Microphone 2. LED indicator 3. LCD display 4. Charging socket 5. SIM Card socket 6 10 8. Power On/Off button Press to turn the unit on and off. 9. Volume increase button Press to increase the speaker’s output. 10. Volume decrease button Press to decrease the speaker’s output. 6. Speaker 7. Mode/ Multi-function button Multi-function button. See Operation Instruction for more information.
Operation Instructions Turning On/Off the Speakerphone Turning On: Speakerphone is in Off mode: Press and hold the Power button for about 5 seconds until LCD lights up and shows “checking SIM” in the display. When there’s no SIM Card in the Speakerphone, the LCD will show “no SIM” and “BT-HFKP30” will show up in the display. The unit will beep twice and LED will flash every second. Notes: 1. If the Speakerphone has not been paired with a Bluetooth device, “BLUETOOTH” will eventually appear in the display.
Operation Instructions (Continued) Connection/Link to a Mobile Handset When either the mobile handset or the Speakerphone is turned off, the two remain be paired. However, the connection (which allows the two to interact) will be lost. To reconnect, follow these steps. 1. On your mobile handset, select "BT-HFKP30" from the paired list of options on your handset screen. 2. On your speakerphone, press the multi-function button once and select "Accept" on your handscreen to complete connection.
Operation Instructions (Continued) How to use the speakerphone Make sure the speakerphone is connected to your mobile handset and the battery is fully charged. Answering a Call: To answer a call, quickly press the multi-function button. "Active Call" will appear on the LCD screen. Ending a Call: To end a call, quickly press the On/Off button. The speakerphone will return to standby mode. Reject a Call: To reject a call, quickly press the On/Off button.
Operation Instructions (Continued) Buttons and Sound Indication Buttons Power On/Off MultiFunction Button (MODE) + Functions Power On Power Off Call Reject Call End Pairing Call Answer Last Number Redial Call Transfer Reconnect/Link Volume Increase Disconnect Volume Decrease Contact List Operation Press and hold for 5 seconds Press and hold for 5 seconds Press and hold once Quickly press once Quickly press once Quickly press once Press twice Press and hold for 3 seconds Quickly press once Quickly press
Care and Maintenance • Turn off when not in use. • Do not expose the Speakerphone to liquid, moisture or humidity. It is not waterproof. • Do not use abrasive cleaning solvents to clean the Speakerphone. • Do not expose the Speakerphone to high temperatures. • Do not attempt to disassemble the Speakerphone. It does not contain serviceable components. • If you do not use the Speakerphone for long periods, store it in a dry place, free from extreme temperature, humidity and dust.
Specifications Bluetooth Specifications: Bluetooth Profile Supported: Operating Frequency Band : Rechargeable Li-ion Battery: Multi-Pairing: : Normal Charge Time: Talk Time: Standby Time: Dimension(L/M/S): Weight: Version 1.2, Class 2, 10 Meters H.S.P. 1.1, H.F.P. 1.5 2.402 to 2.4835 GHz unlicensed ISM band 3.7V DC, 800mAH Up to 7 Bluetooth devices DC 5 v to 6 v, 400 mA, mini USB connector 4 hrs.(approx..) 8 to 10 hrs.(approx..) 150 hrs.(approx..) 11 x 7 x 3.8 cm. 80 g.
Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.
