User`s guide

MAGMA
12 Chapter 4 Install 3
rd
Party PCI Cards
Slide the enclosure cover backwards, disengaging it from the guides at
the front of the enclosure, by firmly grasping the rear cover lip over the
card IO area and pulling the cover backward about ¼” and then lifting
the cover off.
CAUTION
When replacing the enclosure cover, be sure that the front edge
guides on the cover engage the inner lip of the enclosure.
Install PCI Cards in PCI Expansion Chassis
CAUTION
When installing PCI cards or hard drives, please ensure that the
input current rating specified on the AC input label is not exceeded.
Slot ordering in the 3 slot PCI Expansion chassis should begin with the
top slot – labeled SLOT 4.