Specifications

MAGMA
2 Chapter 1 Introduction
• Inventory the shipping carton contents for all of the required parts
• Gather all of the necessary tools required for installation
• Read this manual
Parts List
The following parts are provided:
Qty Item
1 1 slot PCI expansion enclosure (Half or Full)
1 PCI expansion cable (1-meter or 1.5-meter)
1
1
12-Volt DC Power Adapter w/U.S. Standard 115V power
cord
1 Host Card (CardBus is standard)
4 Rubber feet (to be installed by user)
1 Software CDROM
1 User’s Manual
1
The Magma PCI expansion cable uses a 68-pin connector; however, it is NOT an “off-the-
shelf” SCSI cable. The Magma PCI expansion cable is a custom cable designed specifically
for PCI Expansion.
Tools Required for Installation
In order to complete the installation of the Magma
expansion system you will need a Flat-head
screwdriver. You may also use your thumb and
forefinger. You will also need a screwdriver to install
your PCI card.