Specifications

Chapter 3: Digidesign EB-7 PCIe-to-PCIe Expansion
Chassis
19
Expanded Systems Guide
2 Move the power switch on the back panel of the PCIe-to-PCIe Expansion Chassis to the On position.
3 Press the power switch on the front panel of the PCIe-to-PCIe Expansion Chassis to turn on the chassis. The
Power switch LED lights when the chassis is fully powered.
4 Turn on any external hard drives. Wait approximately ten seconds for them to spin up to speed.
5 Turn on any MIDI interfaces and devices, or synchronization peripherals.
6 Lower the volume of all output devices, then turn on your Pro Tools audio interfaces. Wait at least fifteen
seconds for the audio interfaces to initialize and the status LEDs to stop flashing.
7 Turn on your computer.
Shutting Down Your System
To shut down your Pro Tools system:
1 Lower the volume of all output devices and monitors.
2 Shut down your computer.
3 Turn off Pro Tools audio interfaces.
4 Turn off any MIDI interfaces or devices.
5 Turn off external hard drives.
6 Press the power switch on the front panel of the expansion chassis.
Location of the back panel power switch
Location of the front panel power switch
0
1
2
3
4
5
6
7
Power switch
Power switch