Specifications

Chapter 3: Digidesign EB-7 PCIe-to-PCIe Expansion
Chassis
15
Expanded Systems Guide
Connecting Power to the Chassis
The AC Power connector on the rear panel of the PCIe-to-PCIe Expansion Chassis accepts a standard AC
power cable. The chassis is auto power-selecting (100V to 240V) and will automatically work with a standard
modular cable to connect to AC power receptacles in any country.
To connect power to the chassis:
 Connect the supplied AC cable to the AC connector on the back panel of the chassis.
Installing Pro Tools|HD Cards
To install Pro Tools audio cards in the chassis:
1 Make sure the power switch on the back panel of the chassis is in the off position.
2 To ensure proper grounding, make sure the chassis is connected to a power source (such as a power strip or
wall outlet), using the supplied AC cable.
3 Remove the 6 screws from the top cover of the expansion chassis, and slide the cover toward the back panel
to remove it.
Connecting the power cable to the chassis
Top panel screws
AC power connector
0
1
2
3
4
5
6
7
Remove 6 screws