Product specifications

in which it was received from our plant. MAGMA cannot be responsible
for any physical damage to the product or component pieces of the
product (such as the host or expansion interfaces for PCI expansion
systems) that are damaged due to inadequate packing. Physical
damage sustained in such a situation will be repaired at the owner’s
expense in accordance with Out of Warranty Procedures. Please,
protect your investment, a bit more padding in a good box will go a long
way to insuring the device is returned to use in the same condition you
shipped it in. Please call for an RMA number first.
The sheer number of PCI cards and device drivers available makes it
impossible for MAGMA to fully test and certify all available PCI cards for
use in the PCI expansion system. Our best advice to you in this regard
is to insist on full PCI Specification compliance from your card and
system vendors. Cards and systems should be at least PCI
Specification Revision 2.0 compliant with 2.1 compliance
recommended. Compliance in your system motherboard, PCI cards and
console firmware (or BIOS) is your best assurance that everything will
install and operate smoothly.
MAGMA will attempt to assist you to the best of our ability. Of course,
MAGMA will fully support any and all of the PCI cards sold by MAGMA
when installed in either your system enclosure or the MAGMA PCI
Expansion System.