OWNER’S MANUAL For Model P10-501 Stainless Steel Gas Grill U.S. PATENTS 4,788,962 5,330,154 5,413,090 D 292,163 Other Patents and Design Patents Pending For questions regarding performance, assembly, operation, parts, or returns, contact the experts at MAGMA by calling (562) 627-0500 7:00 a.m. - 5:00 p.m. Pacific Time Monday thru Friday or e-mail us at mail@MagmaProducts.com Read these instructions carefully before use. Familiarize yourself with the appliance before connecting it to its gas container.
IMPORTANT SAFETY WARNINGS READ ALL INSTRUCTIONS BEFORE OPERATING. • USE OUTDOORS ONLY. • DO NOT USE THIS APPLIANCE INSIDE THE BOAT OR ANY ENCLOSED SPACE. • GRILLS RADIATE HEAT. CLEARANCE FROM COMBUSTIBLES, 24” SIDES AND BACK. NEVER USE UNDER AWNINGS, PATIO COVERS, ETC. • USE PROPANE GAS ONLY. FUEL STORAGE SHOULD BE IN COMPLIANCE WITH THE AMERICAN BOAT AND YACHT COUNCIL (ABYC) STANDARDS A-1 (9), MARINE LIQUIFIED PETROLEUM GAS (LPG) SYSTEMS. • FOR NATURAL GAS APPLICATION CONTACT MAGMA.
SETTING UP YOUR GRILL DANGER: Never Cover Ventilation holes.
Mounts sold separately. See our website www.MagmaProducts.com for mounting options. Level Flat Surface 8 7 10 9 7 Select and install appropriate Magma mount in your desired location. Prior to installing the grill, check that mount does not easily move with a reasonable force applied. 8 Next, decide if gas control valve will be easier to access from the center right side or center left side of grill. This will be based on your placement of the mount (see picture front cover).
13 12 14 5
USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS • Magma On-Board LPG (Propane) Valves and Hose Kits allow Magma Grills to be installed within a boats existing on-board, pre-regulated low pressure LPG (Propane) system. • Use only Magma Type 3 Low Pressure LPG (Propane) Valves. See our Valve Application Guide at www. MagmaProducts.com for correct valve. • In North America use Magma A10-225 LPG 10' Hose Kit in conjunction with Type 3 Valve.
OPERATING PROCEDURES WARNING: Do not overheat grill. Magma grills do not require pre-heating. Stainless Steel loses anti-corrosive characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed. If medium or high heat is required, grill with lid open. LIGHTING INSTRUCTIONS • Open lid during lighting, hang lid on side of the grill to block the wind (see 14). • When igniting grill, use a long nozzle butane lighter.
MAINTENANCE A Word About Stainless Steel: Stainless Steel, contrary to popular belief, can rust. Most commonly, deposits on the surface of the product will trap moisture. It is this moisture that robs the stainless steel of oxygen. Oxygen is the element that reacts with the stainless steel to form a protective layer of chrome oxide. Robbed of oxygen this reaction does not take place and “crevice corrosion”, or “surface rusting”, occurs.
REPLACEMENT PARTS P10-501 Original Size 10-151 Knob Assembly 10-152 Lid Assembly 10-253 Cooking Grill 10-466 Radiant Plate 10-657 Burner 10-258 Flame Deflector 10-259 Bowl 10-161 Grease Tray 10-164 "L" Bracket & Clamp Assembly 10-160 Turbo Venturi Tube Assembly 10-263 Control Valve Regulator-Type 1 8
TROUBLE SHOOTING GUIDE Problem Possible Cause Possible Solution Burner will not light No gas flow Check fuel level, replace canister or refill cylinder Obstructed gas flow Clean burner, turbo venturi tube, and valve orifice.
ACCESSORIES 9 Piece Stainless Steel Gourmet “Nesting” Cookware Magma® Marine Kettle® Grill Cover/Tote Bag Available in boating’s most popular colors, in Sunbrella® or in Magma’s solution dyed acrylic fabric. 5-year guarantee against fade or mildew.