Installation guide

MAGMA
10 Chapter 5 Troubleshooting
Chapter 5 Troubleshooting
Identifying the Problem
The ExpressCard to PCI Expansion System is correctly displayed as a
“PCI standard PCI-to-PCI bridge”. When connected and functioning
correctly, this Expansion System will be displayed as follows:
If the above Device Manager image is not what you are seeing when
you verify your installation, you may want to try the following
troubleshooting steps to help you locate and resolve your installation
issues – without having to call Technical Support.
If you have trouble with the Magma expansion system, you must identify
the problem before you can fix it. First, verify that all cards are inserted
correctly and securely in the correct slot and that all cables are
connected properly. For information about your particular expansion
chassis, refer to the separate Expansion Chassis User’s Guide
.
Always remember to power On and Off correctly when rechecking and
testing your installation.
This chapter is divided into the following sections:

Device Manager Shows a Bang

Computer Can’t Find the PCI Expansion System

Windows Error Codes

Uninstall the Mobility eCard Driver

Uninstall the Mobility eCard Patch