Instructions / Assembly

Grease

Tray

Grease Tray Pins

5 With grill body tightly attached to L-Bracket, unthread burner 3 full revolutions only.

CAUTION: DO NOT UNTHREAD MORE THEN 3 REVOLUTIONS, AS GRILL MAY FALL

OVERBOARD.

s,IFTENTIREGRILLUPTODISENGAGEFROMGREASETRAYPOSITIONINGPINS(5a & 5b) and rotate so lid

OPERATESFREELYINDESIREDPOSITION(5a).

s#AREFULLYLOWERBACKDOWN(5d)MAKINGSUREPINSAREREENGAGEDANDRETHREADEDhBURNERv

back 3 revolutions until tight (6))FBURNERDOESNOTTURNREVOLUTIONSTHEPINSARENOT

ENGAGEDPROPERLY

Threaded

"URNER0IPE

7)NSTALLRADIANTPLATEOVERBURNERONBOWLRIDGE

8)NSTALLGRILLGRATEBYROTATINGGRATESOTHATBOTHGRILLGRATETABSSLIDEUNDERTHEHOLDINGCLIPS(8a),

LOCKINGGRATEANDALLINTERNALCOMPONENTSINCORRECTPOSITION

9 )NSERTTHEVENTURITUBEINTOTHETHREADEDPIPEONTHEBOTTOMOFTHEGRILLBODYANDFIRMLYTIGHTEN

THETHREADEDNUTSONUTDOESNgTTURNWHILEROTATINGTHETURBOVENTURITUBE.OTEVENTURITUBE

SHOULDSTILLROTATEFREELY6ENTURITUBESHOULDBESTOWEDWITHVALVEINACLEANDRYENVIRONMENT

WHENNOTINUSE3EE3TOWING4IPSPAGE"EFOREEACHUSEPRIORTOINSERTINGVENTURITUBE

CHECKTHATTHETHREADEDPIPEISFREEOFSPIDERWEBOBSTRUCTIONS