Instructions / Assembly

ADJUSTING GRILL TO WIND CONDITIONS

5 Remove cooking grill grate

6 With grill body tightly attached to L-Bracket, unthread lower charcoal grill nut 3 full

revolutions. (6a) Lift entire grill up to disengage from stud positioning pins.

7 Rotate so lid operates freely in the desired position. (7a) Carefully lower back down,

making sure pins are re-engaged and rethread the “nut” 3 revolutions until tight.

If the nut does not turn 3 revolutions the pins are not engaged properly.

8 Reinstall cooking grill grate over threaded center post - turn clockwise until at desired

height.