Owner manual

1-800-MAGLINE (624-5463) Page 27 www.magliner.com
CooLift
®
Area Description
Method of
Inspection
Normal Condition
Findings
Pass or
Fail
Timing Notes
Welds Front caster plate Visual inspection No cracks or damage Monthly Welds Base plate Visual inspection No cracks or damage Monthly Welds Enclosure Visual inspection No cracks or damage Monthly Welds Handle cross bar Visual inspection No cracks or damage Monthly Welds Battery Box Visual inspection No cracks or damage Monthly Welds Vertical slide rod Visual inspection
• Rod is straight with no signs of
wear
• Rod plating is not cracked or dam-
aged
Quarterly
Operator Interface
Guide blocks
• Visual inspection • Cycle deck up
and down several times
Blocks are not damaged or worn and move freely in the vertical slide
Quarterly
Operator Interface
Gas spring mounting
• Mounting studs • Rod and body connectors • Preload screws are tight
Manual / Visual inspection
• Components are tight and
connectors engaged fully with studs
Quarterly
Electrical
Wiring
• Wire connections • Wire crimps and solder
joints
Manual inspection
No loose connections, crimps or solder joints
Quarterly
Electrical Battery box
Manual / Visual inspection
• Battery box case and cover are
free of damage, dents and cracked welds
• No loose components • Cover for charger port is intact • Connecting screws to the battery
terminals are tight
• Battery box cover screws are tight
Quarterly
Electrical Operation
Cycle deck up and down several times
• Deck should move through entire
range of motion without tripping circuit breaker
• Buttons should not stick in down
position
Quarterly
Area Description
Method of
Inspection
Normal Condition
Findings
Pass or
Fail
Timing Notes
Operator Interface
Gas spring condition and operation
• Visual inspection • Disconnect cylinders from
studs per instructions in manual and try to compress the spring
• Rods should be straight and free
of oil
• Spring should not compress
easily and return to fully extended position if compressed
Annually