Owner manual

1-800-MAGLINE (624-5463) Page 24 www.magliner.com
CooLift
®
Area Description
Method of
Inspection
Normal Condition
Findings
Pass or
Fail
Timing Notes
Electrical Buttons and housing Visual inspection No cracks or damage Weekly Welds No cracked welds Visual inspection Welds intact, no cracks Monthly Brake System Fluid level Visual inspection
Fluid level up to notch in master cylinder reservoir
Monthly
Brake System
Hose without damage, abra- sion, wear
Visual inspection No visible damage or wear Monthly
Brake System
Brake discs have minimal rub and warp
Spin wheel
Wheel should continue to rotate several times before stopping
Monthly
Hydraulics
Fittings not leaking
• Hose ttings inside
enclosure
• Tube ttings under
enclosure and in frame
• Cylinder ttings
Wipe around ttings with dry rag
No leaks (rag remains dry) Monthly
Hydraulics
No cracks or damage to hose or tubing
Visual inspection No deep scratches or dents Monthly
Hydraulics Manual operation
Operate hydraulic pump up and down several times manually using pump handle and bypass valve
• Deck should lift completely within
35 strokes of pump handle
• Manual bypass valve should allow
deck to descend and not leak once re-closed
Monthly
Hydraulics Cylinder bearing cap is tight
Manual / Visual inspection
• Manually attempt to turn the bear-
ing cap
• Inspect to determine if bearing cap
is ush with top of cylinder - should not see any threads above cylinder body
Monthly
Hydraulics
Cylinder mount screws to frame and deck are tight
Manual inspection
Cylinder body is tight to frame; deck mounting screw is tight
Monthly
Hydraulics Fluid level Visual inspection
Fluid should be about 1/2 inch below top of reservoir when deck is down
Monthly
Suspension
Wheels and casters spin freely
Manual inspection
Wheel should continue to rotate sev- eral times before stopping
Monthly