Owner manual

1-800-MAGLINE (624-5463) Page 23 www.magliner.com
CooLift
®
Area Description
Method of
Inspection
Normal Condition
Findings
Pass or Fail
Timing Notes
Hydraulics
Cylinders not leaking (note especially front cylinder)
Visual inspection Thin lm of oil on piston rod Weekly
Hydraulics
Cylinder condition
• No rod scoring • Return springs fully
functional
Visual inspection
Cylinder rod is smooth and retracts fully into cylinder body
Weekly
Suspension
Wheels and tires are in good condition
Visual inspection Wheels and tires are free of damage Weekly
Suspension
Components are straight and undamaged
• Front wheel mounting yoke • Main axle • Rear swivel caster frames
Manual inspection
• Components are not damaged and
operate freely
• Main axle plating is not cracked or
damaged
Weekly
Operator Interface
External mounting screws are tight
• Base plate mounting to
frame
• Enclosure mounting or base
plate
• Handle mounting screws • Switch plate mounting
screws
Manual inspection
Components are tight to mounting surfaces
Weekly
Operator Interface
Handle, enclosure and door are free of damage and in good condition
Visual inspection
• Straight sections • Smooth curves • Flat surfaces • Minor scratches and dings are
expected
Weekly
Operator Interface Handle grips Visual inspection Grips are not worn or damaged Weekly Operator Interface Containment strap
• Belt should be free of tears and abrasions • Plating on buckle should not be cracked
or damaged
• Mounting screws should be tight • Mounting tab should not be bent or dam-
aged
• Belt should retract into housing such that
only the buckle protrudes
• Housing should not be cracked or
damaged
• Strap tongue should rotate freely
Weekly