Owner manual

1-800-MAGLINE (624-5463) Page 22 www.magliner.com
CooLift
®
Area Description
Method of
Inspection
Normal Condition
Findings
Pass or Fail
Timing Notes
General
Inspection
Warning and branding labels
are in good condition
Visual inspection
Labels are in place and not coming
loose
Labels are in good condition
Red stripes are in place and in
good condition
Weekly
Frame
Frame is in good condition
No damage
No excessive wear
Visual inspection
Straight sections
Smooth curves
Flat surfaces
Minor scratches and dings are
expected
Weekly
Frame Containment strap plate Visual inspection
• Plate should be at and free of
damage or excessive wear
Plating should not be cracked or
damaged
Mounting screw should be tight
Weekly
Deck
Deck is in good condition
No damage
No excessive wear
Visual inspection
Straight sections
Smooth curves
Flat surfaces
Minor scratches and dings
Weekly
Deck
Yoke screws are not loose
in deck
Manual inspection Screws are tight Weekly
Brake System
No system leaks
Fittings on master cylinder,
connecting block & calipers
Master cylinder body
Caliper body
Hoses
Wipe around
ttings and master
cylinder with dry
rag
No leaks (rag remains dry) Weekly
Brake System
Brake lever in good condi-
tion and operating properly
Visual inspection
Operate brake
No visible damage
Smooth operation
Weekly
Brake System
Holding brake pawl in good
condition and operating
properly
Visual inspection
Set brake
No visible damage
Brake locks in place
Weekly
Brake System
Mounting screws tight
Master cylinder mount to
handle
Master cylinder cap
Connecting block to base
of enclosure
Caliper mounting
Manual inspection Parts are tight to mounting surfaces Weekly