Owner manual

1-800-MAGLINE (624-5463) Page 19 www.magliner.com
CooLift
®
Foam handle sleeve - 9” 302285
Front caster yoke 309098
Grommet - 5/8” ID x 1-1/8” OD x 3/8” wide 309024
Handle mount bracket 302721
Hex head cap screw - 5/16”-18 x 1-1/4” long 80012
Hex head cap screw - 3/8”-16 x 1” long 80025
Hex head cap screw - 3/8”-16 x 1-1/4” long 80026
Hex head cap screw - 3/8”-16 x 1-1/2” long 79988
Hex lock nut - 1/4”-20 80675
Hex lock nut - 5/16”-18 80676
Hex lock nut - 3/8”-16 80603
Hex lock nut ange - 3/8”-16 80624
Hex lock nut w/ nylon insert - #10-24 UNC 80683
Hex lock nut w/ nylon insert - #10-32 UNF 80684
Hex socket head cap screw - 5/16”-18 x 1” long 80038
Hex socket head cap screw - M6 x 20mm 80003
Horizontal brace (handle) 309048
Hydraulic cylinder assembly (includes hydraulic cylinder and tting) 59006
Hydraulic uid - 32oz. container 55407
Hydraulic uid additive - 32 oz. container 55418
Hydraulic hose 55408
Hydraulic pump assembly 63013
Hydraulic pump reservoir 59501
Internal charger mount kit 309209
Junction block 309051
Lock washer split ring for #10 screw 80747
Manual pump handle 63014
Master cylinder 309218
Master cylinder brake line 309083
On/off toggle switch - 30A 62016
Operator up/down switch 63019
Pallet stop for CTA43 models 309206
Pallet stop for CTA48 models - LH 309188
Pallet stop for CTA48 models - RH 309189
Pan head screw - #8-32 x 1/2” long with external lock washer 80218
Pan head cross recess screw - #10-24 x 2-1/2” long 80004
Pan head machine screw - #10-32 x 3/4” long 80121
Pan head machine screw - #10-32 UNF x 1” long 80123
Pan head machine screw - 1/4”-20 x 3/4” long with locking patch 80257
Pan head machine screw - 1/4”-20 x 1” long 80102
Pan head machine screw - 1/4”-20 x 1-1/2” long 80105
Pan head machine screw - 1/4”-20 x 1-3/4” long 80106
Pan head machine screw - 1/4”-20 x 2-1/2” long 80108
Replacement Part Description Part Number