User manual

Nudging objects
Usually you can move an object a small amount by using the arrow?keys to nudge the object (these keys
sometimes have other uses, especially in the Text
Tool).
Nudging is not affected by either magnetic or grid snapping (snapping is described later).
Nudge modifiers
To modify the nudge distance, use these key combinations while using the arrow keys:

Ctrl nudge 5 times the normal distance

Shift nudge 10 times the normal distance

Ctrl+Shift nudge by l/5th the normal distance

Alt nudge by 1 pixel

Alt+Shift nudge by 10 pixels
You can change the normal nudge distance under the general tab in "Utilities -> Options
". Refer to "Customizing Xtreme Print Studio".
Nudge works in most tools.
Cut, copy and paste
These let you move or copy an object in the same document or between different documents. The
procedure is:
1.
Select the object.
2.
To remove the object, choose "Edit -> Cut" (or "Ctrl + X"). To copy the object but not remove
it, choose "Edit -> Copy" (or "Ctrl + C"). Either option puts the object (or a copy of it) onto the
clipboard.
3.
Choose "Edit -> Paste", "Ctrl + V", or "Insert". This pastes the clipboard contents into the
document
"Ctrl + Shift+ V" pastes the clipboard contents into the same X/Y position from where they were cut or
copied. This only applies to objects cut or copied from within Xtreme Print Studio. Objects imported
from other programs are always pasted into the center of the current view.
The object remains on the clipboard so you can paste the same object several times.
Some programs can transfer data on the clipboard in two or more formats. If this applies, the menu
option reads Paste Special
. Selecting it brings up a dialog box that lets you select a format. Xtreme Print Studio automatically
highlights the recommended format.
Page 53