User manual

Changing the size of the undo list
By default the size of the undo list is limited by the available memory only, and with Xtreme Print Studio
being very efficient and today's computers having plenty of RAM you shouldn't run into any problems.
However, if you still wish to limit the memory your undo list can take, you can limit the list size.
To limit the list size:
1.
Choose "Utilities -> Options".
2.
Select the "Tune ups" tab.
3.
Select a "Limited" undo size.
4.
Type in the required value followed by
o
"M" or "m" for a value in megabytes (4M).
o
"K" or "k" for a value in kilobytes (200K).
o
Or no suffix for a value in bytes (3000).
o
Values can include decimal points (1.234M).
o
The list has a minimum size of 1024 bytes (1K).
o
Click either:
o
"OK" to make the change and close the dialog box,
o
Or "Apply now" to make the change but leave the dialog box on screen. This lets you make
further changes.
If the new undo list size is less than its current size you are warned that data will be lost from the undo
list. Then in future, as the list becomes full, the oldest information is automatically discarded.
Page 38