User manual

Sliding the document within the window
The quickest and easiest way to move around the document is to use the middle mouse button (normally
the mouse wheel) if you have one. Click and hold the middle button down and then move the mouse.
Release the button to return to your previous tool.
To move the document within the window you can also:

Use the scroll bars and arrows at the side of the window.

Use the mouse wheel to scroll the document up and down ("Shift + mouse wheel" for left and
right)

Or select the Push Tool from the main toolbar ("H").

Or press the space bar or "Alt + X" to toggle between the current tool and the Push Tool.

Or press and hold down the space bar or "Alt + X" to temporarily switch to the Push Tool
(release key(s) to return to the previous tool). You can then use the mouse to drag the document
around in the window.
The Push Tool InfoBar is the same as the Zoom Tool
InfoBar (described above).
Displaying the scroll bars is optional. Choose "Window -> Bars -> Scrollbars"
to turn them off.
You can change the mouse wheel action between scrolling and zooming in "Utilities -> Options ->
Mouse"
. The opposite action is available then by pressing "Ctrl".
Normal/full screen modes
In normal screen mode part of the window is occupied by the title bar, menu bar, and scroll bars. This
can be inconvenient if you want the maximum possible editing area. Xtreme Print Studio has a second
screen mode, i.e.fullscreen, which displays a more streamlined screen. You can configure each screen
mode as you wish. For example, each can have its own configuration of the control bars. The
configuration is remembered and applies whenever you swap between screen modes.
Normal/full screen is controlled by "Window -> Fullscreen"
("8" on the numeric keypad).
To display the menu bar in full screen mode, move the pointer to the top of the screen.
For information on customizing control bars, see "Customizing Xtreme Print Studio
".
Page 25