User manual

Automatic fit
Your design will be orientated as necessary, but Xtreme Print Studio will not change the size. We
recommend this option if you are having any difficulty getting the orientation right (there are at least four
places where you can set the page orientation, sometimes more for some printer drivers).
This option is best if you have a set size for your design and don't want it altered.
Best fit
Your design will be moved to the center of the page and it will be expanded or shrunk to suit the paper
size.
This option is best if you have a large or small design and want it to fit on one page.
Custom fit
Allows you to have control over your print out, including orientation, size and margins.
The Orientation buttons can be used to choose the orientation of the printout. The scale can be altered
using the Scale
field. The top and left margin fields can be changed (these set where the top left-hand corner of the page
appears on the printer's paper).
The Width and Height
fields give you an alternative way of setting the print scale (when you change one of these settings, the
other changes to ensure the page is always printed with a 100% aspect ratio).
Multiple fit
To print multiple copies on one page, choose Multiple Fit
, enter a value for the number of copies needed across the page (rows), the number down the page
(columns), and the distance between each (gutter).
Page 219