MX

Ungrouping, editing and regrouping
If you want to do any significant editing of a button design, it's best to ungroup the components that
make up the Navbar and then regroup them again afterwards.
To ungroup your bar, select the Navbar by clicking on it on the canvas and then do a normal ungroup
operation ("Arrange" > "Ungroup" or "Ctrl + U"). Or click the Ungroup to edit graphics
button at the bottom of the Navbar dialog.
Note
: If your Navbar had the "Site navigation bar" option turned on, you'll need to turn that option back on
again if required, after regrouping your modified bar.
Once your bar is ungrouped, it is no longer a navigation bar. You are left with a separate button group
for each button state. Also, if the "All buttons the same width
" option was turned on, ungrouping might change the button widths because this option is only effective
while the buttons are part of a Navbar. Although you should only make the design changes to the master
button(s), you'll normally want to leave all the other buttons on the page. They are used when you
regroup your Navbar, to recover all your button labels, links, etc., so that you don't have to re-enter
them again.
If you have a mouseover state, the 2 groups that make up the master button will be „soft grouped" so
that they stay together when you drag them around the page. Separate them using "Arrange" > "
Remove soft group" ("Ctrl + Alt + U"). You can then further ungroup each button state on the
MouseOff and MouseOver layers ("Ctrl + U"), in order to work on their respective designs. See the
"Creating your own Mouseover Buttons" section of the Getting Started chapter
for information on how to make buttons.
Remember to regroup each of the button states and then put the soft group back to keep the two button
states together once you're done editing. Do this by making sure both layers are turned on in the Page &
Layer Gallery, select both button state groups and then "Arrange" > "Apply soft group". See the
Object Handling chapter for more information on soft groups (Soft Groups, Soft Groups
).
It's a good idea to test your button works as expected by previewing your page, before re-assembling
the bar. To put your bar back together, select the modified button and choose "Arrange" > "Create
Navigation Bar"
.
Page 999