MX

Combining shapes
The menu option "Arrange" > "Combine shapes" (or right click and choose Combine Shapes
) provides you with a range of advanced options to combine shapes to make new shapes, such as
adding, cutting, or slicing. You can use combine shapes on any type of object, including bitmaps.
Creating holes in shapes
Use "Arrange" > "Combine shapes" > "Subtract shapes"
. This is similar to using join shapes (described above). The differences are:

The top shape (or top group) becomes a hole through the other shapes.

The line attributes and colors of the underlying shapes are unchanged.

Combine shapes physically alters the lines. The only way to restore the original shapes is by using
undo.

The number of overlapping shapes has no effect.
Merging several shapes into one
For example, to produce the shape on the right from the three shapes on the left:
1.
Create the two circles and the rectangle.
2.
Select all three shapes.
3.
Right click and choose "Combine shapes" > "Add shapes".
The new shape takes line attributes and colors from the top shape (in this case the rectangle in the
illustration).
Intersecting shapes
With intersecting shapes
, the new object is created from those parts of lower shapes that are covered by the top object.
Select the shapes you want to mask and the
front (mask) shape.
Choose "Arrange" > "Combine shapes" >
"Intersect shapes"
. This creates a new shape. The top shape
disappears.
The line attributes and colors of the underlying shapes are unchanged. Areas not covered by the top
Page 489