MX

Guide Objects and Guidelines
Guide objects and guidelines are objects on a special layer, the guides layer. A guide layer is
automatically created when you create a guideline (see below), or you can create one manually by right
clicking in the Page & Layer Gallery and selecting Create Guide Layer (see Layers
for more information).
Use Snap to guides in the Window
menu (or key 2 on the numeric keypad) to turn on snapping to guide objects.
Any object placed on the guides layer becomes a guide object. These can be any object type including
lines at any angle, irregular shapes, and quickshapes. You can create, scale, and delete objects on the
guides layer as usual, but they always appear as thin dotted red outlines; any applied line width or fill
color is ignored. This information is retained, and if you later move the object from the guides layer to a
normal layer, line thickness, and colors are shown again.
You can use guide objects to draw construction lines such as lines passing through a vanishing point for
perspective drawing.
Placing objects onto the Guides Layer
First ensure there is a guide layer in the Page & Layer Gallery,
see above. You can create objects directly on the guides layer by selecting it and creating objects as
usual.
The Page & Layer Gallery showing a guides layer
above two other layers, and selected.
You can also cut or copy
objects from another layer
and then paste those
objects into the guides
layer. To paste the objects
in the same relative position
on the guides layer use the
keyboard shortcut "Ctrl +
Shift + V".
Move to layer in front and Move to layer behind on the Arrange menu (or right click and choose "
Arrange" > "Move to layer in front/behind")
will skip the guides layer and so cannot be used to move objects onto the guides layer.
Creating a guideline
Guidelines are vertical or horizontal lines and are a quick and easy way to align a series of objects on the
page.

Turn rulers on ("Ctrl + L") or right click and choose "Show Grid/Guides" > "Show Rulers"

Drag from a ruler onto the page.
Or

Double click on the ruler to create a guideline aligned to the click point.
This automatically creates a guides layer and puts the guidelines on that layer.
Or, using the Page & Layer Gallery
:
1.
Right click in the Page & Layer Gallery and choose Properties.
2.
If necessary, click the Guides tab.
3.
Select horizontal or vertical.
Page 387