User manual

Remove 65
www.magix.com
An even more specific option is to create a noise sample yourself.
Create noise sample
Length: The length can be set in ms if the "auto" button is switched
off, otherwise the length of the noise sample will be determined
automatically.
Pick! Generates a noise sample. A short noise sample is taken from
the selected play range. The playback marker can be moved with the
transport control when the dialog is open to search for a suitable
position. If the playback position is between two objects, it's not
possible to generate a noise sample. Play allows the noise sample to
be previewed for testing purposes.
Wizard: This opens a wizard that helps to create the noise sample.
The wizard mainly consists of a search function which helps you find
the suitable noise sample in the audio material. Various distortion
types can be selected.
Save: The noise sample created can be saved in the noise sample
folder. It is then available as a new noise sample in the noise sample
preset list for any other project.
Audio type: Set the type of edited audio material here, and the
algorithm will be customized accordingly.
Spectral view
"Spectral view" shows the spectrum of the noise sample by default. It
can be switched to spectrogram view by pressing the corresponding
button on the right-hand side. In this case, the played audio material
is shown as a spectrogram. The spectral sections removed with by
the DeNoiser are displayed in red.
Mode
Anti-noise: In this mode, the DeNoiser works in an optimized mode
to remove particularly "noisy" distortions.
Anti-hum: In this mode, the DeNoiser works in an optimized mode to
remove tonal disturbances. This includes feedback from power
cables, power humming, PC fans, video cameras, or ventilation
noises.
If the option "Max. damp tonal noise" is active, then this type of