User manual

64 Remove
www.magix.com
Value display: Here you can set a logarithmic or linear display as well
as an enlargement of the filter curve.
Value range: Here you can set the displayed value range in dB.
Curve display: Here you can switch between a bar and a curved
display.
DeNoiser
The DeNoiser removes persistent background noise like computer
humming, hissing, noises from sound cards, disturbance from ground
wires, interference from audio-equipment with high-impedance
outputs (e.g. turntables), or other device noises. Subsonic noise or
rumbling can be removed effectively from LPs with the rumble filter.
The DeNoiser requires a short section from your music which
contains a sample of the audio distortion, usually from the start or
end of the recording.
When the DeNoiser is activated in the project for the first time, a
sample of the distortion will be searched for immediately after the
playback marker. The automatically detected noise sample enables
good results to be achieved even without opening the DeNoiser
dialog.
For more specific results, open the dialog with the "Edit" button.
Noise sample
Noise sample: If the automatic noise sample settings were not
suitable for finding noisy material, then a noise sample can be
selected from the list. There are several typical distortions available,
e.g. camera noises or power mains humming.