User manual

Track window and constant control elements 35
www.magix.com
can be detected by horizontal lines.
More detailed explanations can be referenced in the section "Spectral
cleaning (view page 69)".
This display also makes it easier to find sections in a song quickly,
since instrumental changes can be clearly seen in the spectrum. On
the other hand, the waveform display will not indicate changes if the
volume level does not fluctuate.
Lock all objects
If this button is activated, the objects on the master track can't
be moved.
This option is activated by default to prevent that you move the audio
track of a video inadvertently and image and sound become out of
sync (the sound starts too early or late in the video). This option
usually doesn't require changing; there are very few cases where it is
useful to remove this lock. More on this in the section Cut sound.
Enlarge track window
The entire track window can be enlarged to include the entire
screen. Click on the corresponding button on the right-hand
side.
Transport control
Use the transport control to control the playback position in the
project. The position line, which indicates the current playback
position, is a thin vertical line located in the track window.
Quickly move the position line within the project by using the position
slider.
The time display indicates the current playback
position (using the measurement unit selected via
Options > Measurement units (view page 108))