X6

Video recording 79
crossbars for audio and video. If you have a problem, try out the different
configurations until the right sound matches the right image.
Composite-in = the normal video input (typically a cinch jack)
S-video = S-video input (mini-din jack)
SVHS-in = SVHS input (special cable)
Tuner-in = TV signal of the integrated tuner
Display
Video decoder: If the picture only appears in black & white or it flickers, the video
standard may be set incorrectly. In mainland Europe, PAL_B is used.
VideoProcAmp: Fine-adjustment of colors, brightness, contrast etc. We recommend
against changing any of the manufacturer’s settings.
Format: Please do not change anything here. The capturing format is set in the
"Recording quality" option in the video recording dialog.
Station selection
This option is only available if a TV tuner is integrated into your video card.
Audio
Songs, noises, or instruments can be easily recorded in MAGIX Video Pro X6 using
the audio recording function. A hooked-up microphone or various audio devices
(especially a stereo system) can be used as recording sources.
Connecting the source for recording
First of all, the source of the audio material must be connected to the sound card
input. Again, there are several possibilities which primarily depend on the type of
equipment you have.
If you are recording from a microphone, then please connect the microphone to the
microphone jack on your sound card (usually red).
If you want to record material from a stereo system, then you can use the line-out or
AUX out jacks on the back of your amplifier or tape deck. This involves connecting
them to the sound card input (usually red).
If your amplifier has no separate output (other than for the speakers), then you can
use the connection intended for headphones for your recordings. In most cases, you
will need a cable with two mini-stereo jacks. This type of connection has the
advantage of being able to set the headphone input signal level with a separate
volume. As headphone connections generally are not the best, it is advised that you
use the line outputs if possible.