X6

72
http://pro.magix.com
• Name your recording. It's worth choosing a logical name which will allow you to
find it easily again on the hard drive.
• You can access the appropriate place on the camcorder tape by using the remote
control buttons: shuttle forwards, backwards, and start/stop playback. To start
recording, click on the "Record" button. Keep an eye on the remaining hard drive
space.
• Cease capturing with the "Stop" button and exit the record dialog. You can see
the recording in the film-strip in the lower third of the screen.
Tip: In the DV recording dialog, you can set clips from the DV video which then will
be recorded one after the other (batch capturing). Read more on this in the chapter
"Batch processing" (view page 73).
"DV capturing" dialog
Note: Keep an eye on the available hard drive space before each recording. DV
capture requires approx. 220 MB per minute of video!
Select DV device driver: The device driver for your DV device should be listed here. If
"Record audio" is deactivated, then video without sound is recorded only. "Audio
preview" activates the audio output of the recording.