X6

Audio editing 191
bandwidth is defined by the Q value. The higher the Q value, the narrower and
steeper the filter curve.
You can influence the basic sound of the mix by increasing and decreasing the
broadband so as to give it more "depth" (lower center 200-600 Hz) or more "air"
(Highs 10Khz). You can also decrease the narrowband width (high Q-value) in the
frequency response to remove disruptive frequencies.
Sensor field: The sensor field displays the resulting
frequency response of the equalizer´. The frequency
is displayed horizontally and the increase or decrease
of the respective frequency is displayed vertically.
The blue bullets 1-6 symbolize the six frequency bands. You can move them around
with the mouse until you find the frequency response you want.
You can control the output level of the equalizer with the Peak Meter . With the
Master Gain Controller beside it you can offset the level changes resulting from the
EQ adjustments.