X6

Effects 135
Note: Negative values can, of course, also be entered. The image borders will then
be outside of the visible area.
Size
Width: Enter the width of the image here.
Height: Enter the height of the image here.
Maximize: The image is maximized to the resolution of the film.
Set original size: The image will be scaled to its original size.
Fix proportions: This option makes sure that the image will not be stretched or
distorted. The ratio between width and height will always stay the same.
Note: In the preview monitor you can use the object handles on the sides of the
decorative element to adjust its size. The additional handles for rotation located at
the top can be used to tip the element and align it with a background object.
Zoom
Use the zoom slider to enlarge the complete section proportionately (values greater
than 100) or to reduce it (values less than 100).
Note: When zooming, the image will be centered automatically, i.e. anchor point =
center point.
Section
Sections may be used to display only a portion of the image.