X5

Settings for and management of video projectors 243
Setting up Samplitude/Sequoia
• Start Samplitude/Sequoia; MAGIX Video Pro X5 can remain open.
• Open the Samplitude/Sequoia synchronization dialog. Right-click the "Sync"
button on the transport console, or select the entry "Synchronization settings" in
the "Options" menu.
• Activate the box "Output synchronization active".
• Under "Device", set the first free virtual MIDI device (e.g. "MIDI Yoke NT 1").
Now set the transport controls via MMC (MIDI machine control):
• Click "MMC settings" to open the "MIDI machine control" dialog.
• Activate the box "Send MMC commands (master)", "Transport window as
remote control for external device", and "Space bar for remote control".
• Under "Device", set the second free virtual MIDI device (e.g. "MIDI Yoke NT 2").
• Close both dialogs by pressing the "OK" button.
Now you can conveniently dub your movie in Samplitude/Sequoia while you edit and
cut your work in MAGIX Video Pro X5. Playback can be started from both programs
and always runs synchronously.
MIDI Machine Control (MMC)
MMC modes
The synchronization window provides settings for remote control via MIDI Machine
Control. MAGIX Video Pro X5 supports the control of external devices or through
external devices through MMC.
Send/receive MMC fullframe: With activated output synchronization (MAGIX Video
Pro X5 is master), MMC commands are sent additionally. If the input synchronization
option (MAGIX Video Pro X5 is slave) is activated, MAGIX Video Pro X5 receives
MMC commands.
While playing a range in MAGIX Video Pro X5, the MMC device stops once the end
of the range is reached. If this option is activated, the start and stop commands sent
by the space bar only control the MMC device.
Movie information
This option opens an information window:
Name: Here you can enter the name of the current movie.
Date of creation: Displays the time the movie was created.
Last changed: Displays the time of the last save.