X5

138
Top: Enter the start position from the top image border.
Center: Based on the current image size, the image starting points (left and top) will
be positioned so that they are centered.
Note: Negative values can, of course, also be entered. The image borders will then
be outside of the visible area.
Size
Width: Enter the width of the image.
Height: Enter the height of the image here.
Maximize: The image will be maximized according to the movie's resolution.
Set original size: The image will be scaled to its original size.
Keep proportions: This option makes sure that the image will not be stretched or
distorted. The proportions of width to height will remain the same.
Zoom
Use the zoom slider to enlarge the complete section proportionately (values greater
than 100) or to reduce it (values less than 100).
Note: When zooming, the image will be centered automatically, i.e. anchor point =
center point.
Section
Sections may be used to display only a portion of the image.