X5

106
Tip: To keep things clear, it is recommended at the start to cut the material within
the range and then to drag it backwards or to delete it from the range so that a gap is
present.
• Load the new material that you want to display inside the range by double-
clicking in the source monitor.
• Position the playback marker in the
source monitor at the start position
where the video should be imported
into the arrangement (source in).
• If you want to cut at the scene end,
set the playback marker in the
source monitor at the position
where the end of the scene should
be and click the button for the end of
the range (source out).
• Select the insert mode "Overview (view page 49)" to fill the range in
the arranger with the new material, replacing it with the existing
material.
• Or use one of the two ripple modes (single-track ripple or multi-track
ripple) to cut the material at the start of the range and move it to the
end of the range.
"Overwrite" mode does not change the total length of the project. The new material is
only inserted at the start of the specified range:
The ripple function moves the material in the range together with the subsequent
objects. This changes the total length according to the length of the object: