X4

Objects 99
Cut trimmer
A schematic display of the selected transition and its handles can be found at
the center of the trimming window.
Left arrow buttons (1): These buttons move the last frame of the first object
while adjusting the second. The length of the transition remains. The display
indicates the relative change in comparison with the starting situation when the
trimmer was opened.
Position (2): Moves the second object. The length of the transition is changed.
This corresponds with shifting an object in the arranger.
Object content (3): Moves the movie under the second object. The length of
the object and the object itself are not changed.
http://pro.magix.com
Cro
ssfade (4): Changes the transition’s length between both objects. The
objects remain of equal length. The length can be numerically entered.
Middle arrow buttons (5): Shifts the existing transition. Both objects remain in
their positions, but the transition’s center point moves.
Transition (6): Displays the type of transition. A mouse click opens a popup
window from which you can select a transition.
Right arrow buttons (7): Move the first frame of the second object. The first
object and the transition remains. Only the length of the second object
changes.
Start fade-out/Last frame (8): Switches the left monitor between the start of
the transition and the last frame of the object.