X4

380 MPEG-4 encoder settings
http://pro.magix.com
3.2 216000 5120 20 Mbit/s 25 Mbit/s 1280 x 1024/42.2
4 245760 8192 20 Mbit/s 25 Mbit/s 1920 x 1080/30.1
2048 x 1024/30
4.1 245760 8192 50 Mbit/s 62.5 Mbit/s 1920 x 1080/30.1
2048 x 1024/30
4.2 522240 8704 50 Mbit/s 62.5 Mbit/s 1920 x 1080/64
2048 x 1024/60
5 589824 22080 135 Mbit/s 168.75
Mbit/s
1920*1080/72.3
2048 x 1080/67.8
2560 x 1920/30.7
5.1 983040 36864 240 Mbit/s 300 Mbit/s 1920 x
1080/120.5
4096 x 2048/30
The setting "Level auto" specifies the encoder levels automatically, among
other things for the resolution of the video format specified under "AVC preset"
and the set profile bit rate. If a level is manually set in this case, then other
parameter values may not exceed the permitted maximum values.
Picture type
"Picture type" specifies which parts of a frame should be used as the basis for
the encoding:
 Frame: A frame is a single image from a video sequence, also called a full
image.
 Field: A half-image, two of which combine to produce a frame. Read more
about this explanation regarding "Interlace (view page 395)".
 MBAFF (mac
ro block adaptive frame field): A macro block consists of 16 x
16 pixels. The encoder creates a "frame field" on this basis for encoding.
Field order
Note: This parameter is only available if the setting "Field" is selected for
"Picture type".
In case of interlaced streams, the half-image sequence is set. Read more
about this explanation regarding "Interlace (view page 395)".