X4

Quick Start 31
mo
use mode, since this automatically takes the objects on all tracks found
later on the timeline along with the object being moved.
Note: If your project has both a video and an audio track, it is usually
necessary to cut both tracks synchronously. After camera import, image and
sound tracks are combined into one object, so all cut and move actions effect
both in the same manner. However, if you have created a separate sound
track, which isn't connected to the image material, it is recommended that you
create a group before your editing operations. To do so, select the video
object and the audio object via "Ctrl" + click, and in the "Edit" menu select the
"Group" option (or click the group tool).
http://pro.magix.com
All cutting functions (as well as all other
editing processes in MAGIX Video Pro
X4) are non-destructive. This means that the original material on your hard
drive will not be altered.
Importing individual scenes from longer movies
If you have saved a longer video as a file on your hard disk and only want to
use a section of it for your project, then proceed as follows:
 Double click the desired file in the Media Pool. Double-click the file to load it in
the source monitor and play it back using the transport controls.
 Find the range which you would like to import. Position the playback marker
above the transport control at the start position of the range and click the "Set
in point" button.