X4

Quick Start 23
Note: If the video also has a sound track, it will be displayed here in the same
track. To learn how to separate sound and video, read the "Objects" (view
page 95) chapter.
 Now you have loaded the first file into the arranger, where it can be cut, edited
and exported. You can now load additional files and combine videos, audio
and photos with each other on all tracks.
 To play back the arranger, click the play button on the transport control under
the program monitor to the left.
Tip: By the way, playback and stopping is easier with the space bar.
 A vertical line travels back and forth over the arranger during playback: This is
the playback marker that indicates the current position. You can reposition it
by clicking at different locations in the movie as desired.
 You can also define playback ranges, e. g. to freeze a certain position
independent of the playback marker. You can define an in-point by clicking in
the position bar above the first track, indicating the starting point of the
playback area. If you right-click to the right in the position bar, an out-point will
appear, which indicates the end point of the playback area. The length of the
playback area is shown in the center of the section display.
http://pro.magix.com
 In- and out-points can be moved or placed directly with the mouse: A left click
sets the in-point, and a right-click sets the outpoint.
 To play back the range, click the "Play back range" button on the
transport control under the program monitor.
Now you know how to load and play back media files in different ways. Would
you like to try to make your own movie now?
 If you would like to continue with your own film material, select "New project"
in the "File" menu and read the following section about video import.