X4

Audio editing 207
 O
pen the mixer and activate 5.1 Surround mode. Conduct the Surround
mixdown.
Mixing stereo
Now set MAGIX Video Pro X4 so that only
the stereo track can be heard. You can
mute the recording by clicking the small
arrow next to the button, and then select
"Stereo" in the DVD sound track.
Now open the mixer (view page 195), and if "5.1 Surround" mode is still
active,
then shut it off. Mix the stereo as you normally would, and then
close the mixer.
5.1 Surround mix
Now set MAGIX Video Pro X4 so that only
the Surround track can be heard. Mute the
recording by clicking the small arrow next
to the button, and then select "Surround"
in the DVD sound track.
Now open the mixer (view page 195) and activate 5.1 Surround mode.
Mix the Surround
(view page 198) like usual.
Set formats of individual multi-sound tracks
http://pro.magix.com
Next, make
the necessary changes to the formats of the multi-sound tracks.
This takes place in the MPEG encoder settings, which can be opened form the
burn dialog.
The simplified settings dialog displays an additional section for the multi-sound
tracks. From the flip menu, select the DVD audio track to be set. Now, you can
assign each track to the desired format.
Click "Edit" to open the advanced audio settings dialog for the MPEG encoder.
Now you can define which format the selected DVD audio track should have.
For more information, read the "Audio settings" (view page 390) section in the
"MPEG encoder settings"
(view page 386) chapter.
Note: Even if you create all multi-audio tracks in 5.1 Surround, you must make
this setting for each separately.
Sound tracks which feature the setting "Apply to all multi-sound tracks" will
always be mixed with the other multi-sound tracks, although these will be
created using the format set for them.