X4

196 Audio editing
Stereo panorama: You can set the stereo -position for each track
using the knob.
Note: Double-clicking on the volume or panorama slider sets it
back to its passive default position, in which no CPU is used.
Solo/mute: The "Solo" switches a track into solo mode, which
means that all tracks not switched to "solo" will be muted. "Mute"
makes the track silent.
Effect channels
In addition to normal mixer channels that correspond to the tracks in the
arrangement, you can create two separate effect channels. The principle
behind them: You can take a partial signal from a normal channel into an effect
channel, where the partial signal is then processed with additional effects. This
is a common process used in professional audio production.
In each mixer channel there are two FX-Send knobs (FX 1 and
FX2 ) under plug-in slots.
Here you can determine the strength of the signal from the track that is routed
into both available effect channels.
The FX tracks are usually hidden in the mixer. When an FX-Send is used, they
will appear to the left next to the master section.
http://pro.magix.com