X4

184 Audio editing
th
e audio quality is very high. Additionally, formats are kept after pitchshifting.
Beat markers are not evaluated.
 Resampling: Pitch shift and tempo can not be changed individually. This
method requires comparably little CPU time.
Audio effects in the mixer
You can open audio effect devices in the mixer using the "FX"
button found in each track or in the right master area.
Under "Mastering" you will also find MAGIX Mastering Suite
(view page 185).
"Reset"
resets all effect settings to original values.
Equalizer
The 10-band equalizer subdivides the frequency spectrum into ten areas
('bands') and equips them with separate volume controls. This way it is
possible to create many impressive effects, from a simple boosting of the bass
to complete elimination of a certain range of frequencies. Note: If low
frequencies are boosted too much, the overall sound level is heavily increased
which may lead to distortion. In this event, adjust the overall volume downward
by using the 'master volume' control situated at the bottom center of the effect
rack.
Slider control: Each of the
ten frequency ranges can be separately boosted or
turned down with the ten volume controls.
Link bands: Using this button randomly combines the frequency ranges with
each other in to avoid artificial-sounding overemphasis of an individual
frequency range.
Touch screen (right EQ section): This is the 'sensor field' of the EQ. Here you
can draw any type of curve with the mouse. This will be immediately translated
into a corresponding control setting on the left side of the EQ.
http://pro.magix.com